See Our Reviews
x

2 Yelp Reviews

5.0


9 Google Reviews

5.0

Wine Cellar Refrigeration Solutions For the Trade Menu

Wine Cellar Refrigeration Systems – Cabinet Top External Cool Units (CTE Series)

The Cabinet Top External (CTE Series) wine cellar refrigeration systems are small wine cellar cooling units designed for medium to large-sized, humidity-controlled spaces such as wine cabinets/walls, fur cabinets, and tobacco humidors.

CTE Units can be installed horizontally or vertically outside the cabinet to maximize storage capacity.Cte Series Evaporator

CT Evaporators are available in capacities from 2,513 to 3,547 BTU Per hour and can be used with R22, R134a, or R404a refrigerants. Chilled water models are available by special order.

Wine Cooling Unit Features

  • Very low noise
  • Provides consistent humidity by maintaining a steady coil temperature, reducing the need for expensive temperature and humidity controls in most applications*
  • Extra insulation prevents sweating at higher ambient room temperatures
  • Rust-proof aluminum housing with flat black powder-coated finish. Other colors are available.
  • Constant pressure expansion valve standard.
  • Thermally protected, PSC motorized impeller
  • High-performance staggered coils with copper tubing mechanically expanded into aluminum fins.
  • Each Unit is pressure-tested to eliminate leaks.
  • Factory wired for simple field installation.
  • Coil and drain pan dipped and baked with anti-corrosion coating.
  • ETL certified

 

Available Wine Cellar Refrigeration Options

  • Copper coils and/or stainless steel cabinets for special applications.
  • Chilled water coils.
  • Pre-charge, Cte Series Evaporator rackcustom, or OEM units made to order

Visit www.uscellarsystems.com for installation and maintenance data, as well as wiring diagrams.

Our Application Engineers can help you design the system you need. Call us today, at (562) 513-3017 and we’ll help you get the right product for your project.

Click here to download a PDF version of this pageClick here to  Download PDF Full Specifications WM Series Wall Mount Air or Water Cooled Single & Twin Evaporator Unit with Digital Controllers

CTE Vertical Wine Cellar Refrigeration/Cooling Units Series

 

CTE Cooling System Typical Vertical Installation

Wiring Diagram

  • Keep line sets as short as possible.
  • An excessive number of turns will cause refrigerant flow problems. This could cause early compressor failure. Suction line accumulators are recommended. Required if working lower than the normal 55-65 degrees operation range from the wine cellar
  • The drain line must always flow downhill to drain or pump
  • The system is controlled by a pump-down control system. There is no control wiring between the thermostat and condensing unit
  • The line connections at Fan Coil and Condensing Unit may not be the same as the required line sizes.
  • Standard line sets should be 50′ or less. Extended runs may require larger line sizes and 3oz. oil must be added for every 10′ over 35′

 

Vertical Series

 

 

 

Vertical Series Wall Construction Vertical Series Ceiling Construction

 

CTE Horizontal Wine Cellar Refrigeration/Cooling Units Series

 

CTE Cooling System Typical Horizontal Installation

Wiring Diagram B

  • Keep line sets as short as possible.
  • An excessive number of turns will cause refrigerant flow problems. This could cause early compressor failure. Suction line accumulators are recommended. Required if working lower than the normal 55-65 degrees operation range from the wine cellar
  • The drain line must always flow downhill to drain or pump
  • The system is controlled by a pump-down control system. There is no control wiring between the thermostat and condensing unit
  • The line connections at Fan Coil and Condensing Unit may not be the same as the required line sizes.
  • Standard line sets should be 50′ or less. Extended runs may require larger line sizes and 3oz. oil must be added for every 10′ over 35′

 

Horizontal Series

Horizontal Series Wall Construction Horizontal Series Ceiling Construction

GO HERE TO SEE other wine cellar refrigeration units by US Cellar Systems.

Call +1 (562) 513-3017 & ask for Systems Design

US Cellar Systems creates cooling systems for every size and style of refrigerated wine storage. We have multiple product lines available and can work with you to select and customize the most effective cooling unit for your projects. We are proud to work with builders, contractors, designers, architects, and other custom wine cellar construction experts. Call us today in California at (562) 513-3017 or in Oregon at (503) 928-8778!